在线客服
热线电话
13360545576

扫一扫 更多精彩
产品中心
1.27Female Header, Dual Rows, SMT, U type, Metal Cap
电气性能:

         Pin bit:                                         2*2P~2*50P
  • Rated current:                                         1 AMP
  • Pin material:                                          phosphor copper
  • Plastic material:                                         PA6T
  • Plastic height:                                         3.4mm
  • Withstand voltage:                                         AC 500V/min
  • Contact resistance:                                         20 milliohm Max
  • Insulation resistance:                                         1000 MΩ   Min
  • Working temperature:                                         -40°C to  105°C
服务热线:
0755-29511989
产品详情

Female Header, one type of connector

1. Application: This connector is widely used in PCB circuit boards in electronics, electrical appliances and meters.

2. Function: Its function is to act as a bridge between blocked or isolated circuits in the circuit, and take on the task of current or signal transmission. It is usually used together with row mother to form plate-to-plate connection. Or matched with an electronic wire harness end to form board-to-board connection; It can also be used independently for board-to-board connection.

3. Classification: According to the spacing, it can be roughly divided into 7 categories: 0.8mm, 1.0mm, 1.27mm, 2.00mm, 2.54mm, 3.96mm and 5.08mm (other special spacing can also be customized according to needs); According to the number of rows, there are single row of mothers, double row of mothers, three rows of mothers, four rows of mothers, etc. According to the packaging rules, there are SMT, DIP (Direct Insert/Bend Insert), etc. According to the installation method: 180 degrees, 90 degrees, SMT;; According to whether it is necessary to increase height and whether it is necessary to have positioning posts, there are two types of positioning posts, one is internal positioning posts and the other is ear positioning posts. Female terminal type: U-terminal and Y-terminal (U-terminal, contact with U-terminal with 3 surfaces of general plastic height; Y-terminal, contact with 2 sides generally plastic high with Y-terminal).

  • 1.27Female Header, Dual Rows, SMT, U type, Metal Cap
  • 1.27Female Header, Dual Rows, SMT, U type, Metal Cap
1.27Female Header, Dual Rows, SMT, U type, Metal Cap
电气性能:

         Pin bit:                                         2*2P~2*50P
  • Rated current:                                         1 AMP
  • Pin material:                                          phosphor copper
  • Plastic material:                                         PA6T
  • Plastic height:                                         3.4mm
  • Withstand voltage:                                         AC 500V/min
  • Contact resistance:                                         20 milliohm Max
  • Insulation resistance:                                         1000 MΩ   Min
  • Working temperature:                                         -40°C to  105°C
服务热线:
0755-29511989
产品详情

Female Header, one type of connector

1. Application: This connector is widely used in PCB circuit boards in electronics, electrical appliances and meters.

2. Function: Its function is to act as a bridge between blocked or isolated circuits in the circuit, and take on the task of current or signal transmission. It is usually used together with row mother to form plate-to-plate connection. Or matched with an electronic wire harness end to form board-to-board connection; It can also be used independently for board-to-board connection.

3. Classification: According to the spacing, it can be roughly divided into 7 categories: 0.8mm, 1.0mm, 1.27mm, 2.00mm, 2.54mm, 3.96mm and 5.08mm (other special spacing can also be customized according to needs); According to the number of rows, there are single row of mothers, double row of mothers, three rows of mothers, four rows of mothers, etc. According to the packaging rules, there are SMT, DIP (Direct Insert/Bend Insert), etc. According to the installation method: 180 degrees, 90 degrees, SMT;; According to whether it is necessary to increase height and whether it is necessary to have positioning posts, there are two types of positioning posts, one is internal positioning posts and the other is ear positioning posts. Female terminal type: U-terminal and Y-terminal (U-terminal, contact with U-terminal with 3 surfaces of general plastic height; Y-terminal, contact with 2 sides generally plastic high with Y-terminal).

推荐产品
0755-29511989



深圳市广联精密连接器有限公司

联系人:kevin
手机:15818784205 
固话:0755-29511989
E-mail:Kevin@gljmconn.com
Http://www.gljmconn.com


联系人:吴先生
手机:15811820797微信同号
固话:0755-29511989

E-mail:15811820797@163.com
地址:深圳市龙岗区龙岗街道龙山五路二号新生科技园二园D栋2-3楼

扫一扫 更多精彩
Copyright ©  深圳市广联精密连接器有限公司 .All rights reserved.  粤ICP备19036707号
Copyright ©  深圳市广联精密连接器有限公司 .All rights reserved.  粤ICP备19036707号